 |
What Operating Systems will the MicroLite work with? |
 |
The MicroLite will run on Windows 2000/ME/XP/VISTA.
Back to MicroLite FAQs
|
|
Where can I download software and USB drivers to support the MicroLite USB logger? |
|
You can download (for free) the MicroLab Lite software and drivers from the fourtec Download Center.
Back to MicroLite FAQs
|
|
How do I install the MicroLab Lite software and supporting USB drivers? |
|
To learn how to install the software and drivers you should refer to the MicroLab Lite Installation Guide
Back to MicroLite FAQs
|
|
What is the password for performing calibration using the MicroLab Lite software? |
|
To prevent accidental change of the calibration, the calibration procedure is protected by a password.
The default password is: 1234
Back to MicroLite FAQs
|
|
Can I export my data to Excel with the Microlab Lite software? |
|
Yes. Use the Export to Excel to export the currently displayed data to an Excel spreadsheet. Microlab Lite will open a new Excel workbook displaying the data along with the MicroLite info, including the MicroLite name, serial number and alarm levels setup. If Excel is not installed on the PC then the data will be exported to a CSV text file..
Back to MicroLite FAQs
|
|
MicroLab Lite will not detect the MicroLite |
|
Ensure the USB driver from Silicon Labs was installed on your PC. Also check to see if the LED on the MicroLite device comes on when you plug it into the computer. If not, this could also indicate a hardware fault on the logger. Contact fourtec tech support for further assistance.
Back to MicroLite FAQs
|
fourtec Ltd. All rights reserved.
