ZigBee enables mesh networking which supports a wireless, yet integrated environment with communication between many coordinators, routers and end units in environments where multiple applications are being monitored.
Major points to consider:

1. In a mesh network, all the router units are aware of their environment meaning a router knows with units are close by.
2. When a router sends a message to a specific unit, it relays the message until it gets to the destination.
3. Network recovery from a unit failure.
4. In a mesh network, when a router fails, the network automatically finds a different path via a different router for the message relay.

Back to DataNet FAQs

2.4 Ghz. It is an open license, worldwide.

Back to DataNet FAQs

The DataNet has a built-in 128-bit network security encryption.

Back to DataNet FAQs

Data Logger: RF Transmission range 80 m (line of sight)
Repeater: RF Transmission range power amplifier 800 m (line of sight)
The range will be reduced when working indoors, inside a structure with materials that can block or weaken RF signal such as walls, furniture, etc.
By adding Repeaters or turning the logger into a repeater you may expand your network range.

Back to DataNet FAQs

Go to Network > Form New Network and your Receiver will form a new network with a unique network ID. Note that this feature requires a password.

Back to DataNet FAQs

No - loggers can only transmit data to the network on which it was configured. If you join a new network, all data on the logger memory will be erased. 

Back to DataNet FAQs

Yes, go to Network > Lock Network which prevent any other loggers or Repeaters from joining your network.

Back to DataNet FAQs